Mean Well TDR 480 is one economical slim 480W DIN rail power supply series, adapt to be installed on TS-35/7.5orTS-35/15 mounting rails.The body is designed 85.5mm in width, which allows space saving inside thecabinets.The entire series adopts the full range AC input from 3 340VAC to 550VAC(Dual Phaseoperation possible) and conforms to BSEN/EN61000-3-2, the norm the European Union regulates for harmoniccurrent. TDR-480 is designed with metal housing that enhances the unit's power dissipation. With workingefficiency up to 93 %, the entire series can operate at the ambient temperature between -20℃ and 70℃under air convection. It is equipped with constant current mode for overload protection, fitting variousinductive or capacitive applications.The complete protection functions and relevant certificates for industrialcontrol apparatus (UL508,IEC 62368-1CB approved by UL.) make Mean Well TDR 480 a very competitive power supply solution for industrial applications.
Features
Three-Phase 340~550VAC wide range input(Dual phase operation possible)
Width only 85.5mm
Built-in active PFC function compliance to BS EN/EN61000-3-2
High efficiency 93% and low power dissipation
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15UL508(industrial control equipment)approved
BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
Optional DC OK relay contact
3 years warranty
Applications
lndustrial control system
Semiconductor fabrication equipment
Factory automation
Electro-mechanical apparatus